BLADEZ ION 450 Manuel d'instructions télécharger pdf (Page 11)

FLASH DIFFUSER 0591.3

Flash Diffuser

Installation Post

Diffuser

Cut-outs

DS160 Strobe

Diffuser Retention Tab

Lanyard Holes

USING THE DIFFUSER

The white diffuser can be secured to the front of the DS160 Strobe when softer lighting or

a coverage angle of 100° is desired.

The diffuser reduces the DS160’s light intensity by one full f-stop.

DIFFUSER INSTALLATION AND REMOVAL

1. Position the Diffuser Cut-outs over the DS160’s Diffuser Retention Tabs.

2. Press down lightly until the diffuser is flush against the strobe face.

3. Rotate the Diffuser Installation Posts either direction until the Posts stop

against the strobe’s Diffuser Retention Tabs.

4. Reverse process to remove the Diffuser.

A lanyard or string can be attached to the diffuser by threading it through the two

Lanyard Holes near its edge. Attach the other end to the strobe to prevent

accidental loss.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

Pas de commentaire

BLADEZ ION 450 Manuel d'instructions Page 11